Note
This page is generated from inline documentation in MESSAGE/model_core.gms.
Mathematical formulation (core model)¶
The MESSAGEix systems-optimization model minimizes total costs while satisfying given demand levels for commodities/services and considering a broad range of technical/engineering constraints and societal restrictions (e.g. bounds on greenhouse gas emissions, pollutants, system reliability). Demand levels are static (i.e. non-elastic), but the demand response can be integrated by linking MESSAGEix to the single sector general-economy MACRO model included in this framework.
For the complete list of sets, mappings and parameters, refer to the auto-documentation pages Sets and mappings definition and Parameter definition.
Notation declaration¶
The following short notation is used in the mathematical description relative to the GAMS code:
Mathematical notation of sets¶
| Math notation | GAMS set & index notation |
|---|---|
| \(n \in N\) | node (across spatial hierarchy levels) |
| \(y \in Y\) | year (all periods including historical and model horizon) |
| \(y \in Y^M \subset Y\) | time periods included in model horizon |
| \(y \in Y^H \subset Y\) | historical time periods (prior to first model period) |
| \(c \in C\) | commodity |
| \(l \in L\) | level |
| \(g \in G\) | grade |
| \(t \in T\) | technology (a.k.a tec) |
| \(h \in H\) | time (subannual time periods) |
| \(m \in M\) | mode |
| \(q \in Q\) | rating of non-dispatchable technologies relative to aggregate commodity use |
| \(e \in E\) | emission, pollutants |
| \(s \in S\) | scenarios of land use (for land-use model emulator) |
| \(u \in U\) | land-use types |
| \(r \in R\) | set of generic relations (linear constraints) |
| \(t \in T^{INV} \subseteq T\) | all technologies with investment decisions and capacity constraints |
| \(t \in T^{REN} \subseteq T\) | all technologies which draw their input from the renewable level |
| \(n \in N(\widehat{n})\) | all nodes that are subnodes of node \(\widehat{n}\) |
| \(y \in Y(\widehat{y})\) | all years mapped to the category type_year \(\widehat{y}\) |
| \(t \in T(\widehat{t})\) | all technologies mapped to the category type_tec \(\widehat{t}\) |
| \(e \in E(\widehat{e})\) | all emissions mapped to the category type_emission \(\widehat{e}\) |
Decision variables¶
| Variable | Explanatory text |
|---|---|
| \(OBJ \in \mathbb{R}\) | Objective value of the optimization program |
| \(EXT_{n,c,g,y} \in \mathbb{R}_+\) | Extraction of non-renewable/exhaustible resources from reserves |
| \(STOCK_{n,c,l,y} \in \mathbb{R}_+\) | Quantity in stock (storage) at start of period \(y\) |
| \(STOCK\_CHG_{n,c,l,y,h} \in \mathbb{R}\) | Input or output quantity into intertemporal commodity stock (storage) |
| \(REN_{n,t,c,g,y,h}\) | Activity of renewable technologies per grade |
| \(CAP\_NEW_{n,t,y} \in \mathbb{R}_+\) | Newly installed capacity (yearly average over period duration) |
| \(CAP_{n,t,y^V,y} \in \mathbb{R}_+\) | Maintained capacity in year \(y\) of vintage \(y^V\) |
| \(CAP\_FIRM_{n,t,c,l,y,q}\) | Capacity counting towards firm (dispatchable) |
| \(ACT_{n,t,y^V,y,m,h} \in \mathbb{R}\) | Activity of a technology (by vintage, mode, subannual time) |
| \(ACT\_RATING_{n,t,y^V,y,c,l,h,q}\) | Activity attributed to a particular rating bin [1] |
| \(CAP\_NEW\_UP_{n,t,y} \in \mathbb{R}_+\) | Relaxation of upper dynamic constraint on new capacity |
| \(CAP\_NEW\_LO_{n,t,y} \in \mathbb{R}_+\) | Relaxation of lower dynamic constraint on new capacity |
| \(ACT\_UP_{n,t,y,h} \in \mathbb{R}_+\) | Relaxation of upper dynamic constraint on activity [2] |
| \(ACT\_LO_{n,t,y,h} \in \mathbb{R}_+\) | Relaxation of lower dynamic constraint on activity [2] |
| \(LAND_{n,s,y} \in [0,1]\) | Relative share of land-use scenario (for land-use model emulator) |
| \(EMISS_{n,e,\widehat{t},y}\) | Auxiliary variable for aggregate emissions by technology type |
| \(REL_{r,n,y} \in \mathbb{R}\) | Auxiliary variable for left-hand side of relations (linear constraints) |
| \(COMMODITY\_USE_{n,c,l,y}\) | Auxiliary variable for amount of commodity used at specific level |
The index \(y^V\) is the year of construction (vintage) wherever it is necessary to clearly distinguish between year of construction and the year of operation.
All decision variables are by year, not by (multi-year) period, except \(STOCK_{n,c,l,y}\). In particular, the new capacity variable \(CAP\_NEW_{n,t,y}\) has to be multiplied by the number of years in a period \(|y| = duration\_period_{y}\) to determine the available capacity in subsequent periods. This formulation gives more flexibility when it comes to using periods of different duration (more intuitive comparison across different periods).
The current model framework allows both input or output normalized formulation. This will affect the parametrization, see Section Efficiency - output- vs. input defined technologies for more details.
| [1] | The auxiliary variable \(ACT\_RATING_{n,t,y^V,y,c,l,h,q}\) is defined in terms of input or output of the technology. |
| [2] | (1, 2) The dynamic activity constraints are implemented as summed over all modes;
therefore, the variables for the relaxation are not indexed over the set mode. |
Auxiliary variables¶
| Variable | Explanatory text |
|---|---|
| \(DEMAND_{n,c,l,y,h} \in \mathbb{R}\) | Demand level (in equilibrium with MACRO integration) |
| \(PRICE\_COMMODITY_{n,c,l,y,h}\) | Commodity price (undiscounted marginals of the commodity balances) |
| \(PRICE\_EMISSION_{n,e,\widehat{t},y}\) | Emission price (undiscounted marginals of EMISSION_BOUND constraint) |
| \(COST\_NODAL\_NET_{n,y} \in \mathbb{R}\) | System costs at the node level net of energy trade revenues/cost |
| \(GDP_{n,y} \in \mathbb{R}\) | gross domestic product (GDP) in market exchange rates for MACRO reporting |
Objective function¶
Regional system cost accounting function¶
Accounting of regional system costs over time¶
Equation COST_ACCOUNTING_NODAL¶
Accounting of regional systems costs over time as well as costs for emissions (taxes), land use (from the model land-use model emulator), relaxations of dynamic constraints, and linear relations.
Here, \(n^L \in N(n)\) are all nodes \(n^L\) that are sub-nodes of node \(n\). The subset of technologies \(t \in T(\widehat{t})\) are all tecs that belong to category \(\widehat{t}\), and similar notation is used for emissions \(e \in E\).
Resource and commodity section¶
Constraints on resource extraction¶
Equation EXTRACTION_EQUIVALENCE¶
This constraint translates the quantity of resources extracted (summed over all grades) to the input used by all technologies (drawing from that node). It is introduced to simplify subsequent notation in input/output relations and nodal balance constraints.
\[\begin{split}\sum_{g} EXT_{n,c,g,y} = \sum_{\substack{n^L,t,m,h,h^{OD} \\ y^V \leq y \\ \ l \in L^{RES} \subseteq L }} input_{n^L,t,y^V,y,m,n,c,l,h,h^{OD}} \cdot ACT_{n^L,t,m,y,h}\end{split}\]
The set \(L^{RES} \subseteq L\) denotes all levels for which the detailed representation of resources applies.
Equation EXTRACTION_BOUND_UP¶
This constraint specifies an upper bound on resource extraction by grade.
\[EXT_{n,c,g,y} \leq bound\_extraction\_up_{n,c,g,y}\]
Equation RESOURCE_CONSTRAINT¶
This constraint restricts that resource extraction in a year guarantees the “remaining resources” constraint, i.e., only a given fraction of remaining resources can be extracted per year.
\[\begin{split}EXT_{n,c,g,y} \leq resource\_remaining_{n,c,g,y} \cdot \Big( & resource\_volume_{n,c,g} \\ & - \sum_{y' < y} duration\_period_{y'} \cdot EXT_{n,c,g,y'} \Big)\end{split}\]
Equation RESOURCE_HORIZON¶
This constraint ensures that total resource extraction over the model horizon does not exceed the available resources.
\[\sum_{y} duration\_period_{y} \cdot EXT_{n,c,g,y} \leq resource\_volume_{n,c,g}\]
Constraints on commodities and stocks¶
Auxiliary COMMODITY_BALANCE¶
For the commodity balance constraints below, we introduce an auxiliary COMMODITY_BALANCE. This is implemented as a GAMS $macro function.
\[\begin{split}\sum_{\substack{n^L,t,m,h^A \\ y^V \leq y}} output_{n^L,t,y^V,y,m,n,c,l,h^A,h} \cdot duration\_time\_rel_{h,h^A} \cdot & ACT_{n^L,t,y^V,y,m,h^A} \\ - \sum_{\substack{n^L,t,m,h^A \\ y^V \leq y}} input_{n^L,t,y^V,y,m,n,c,l,h^A,h} \cdot duration\_time\_rel_{h,h^A} \cdot & ACT_{n^L,t,m,y,h^A} \\ + \ STOCK\_CHG_{n,c,l,y,h} & \\[4pt] + \ \sum_s \Big( land\_output_{n,s,y,c,l,h} - land\_input_{n,s,y,c,l,h} \Big) \cdot & LAND_{n,s,y} \\[4pt] - \ demand\_fixed_{n,c,l,y,h} & = COMMODITY\_BALANCE{n,c,l,y,h} \quad \forall \ l \notin (L^{RES}, l^{REN} \subseteq L\end{split}\]
The commodity balance constraint at the resource level is included in the Equation RESOURCE_CONSTRAINT, while at the renewable level, it is included in the Equation RENEWABLES_EQUIVALENCE.
Equation COMMODITY_BALANCE_GT¶
This constraint ensures that supply is greater or equal than demand for every commodity-level combination.
\[COMMODITY\_BALANCE_{n,c,l,y,h} \geq 0\]
Equation COMMODITY_BALANCE_LT¶
This constraint ensures the supply is smaller than or equal to the demand for all commodity-level combinatio given in the \(balance\_equality_{c,l}\). In combination withe constraint above, it ensures that supply is (exactly) equal to demand.
\[COMMODITY\_BALANCE_{n,c,l,y,h} \leq 0\]
Equation STOCKS_BALANCE¶
This constraint ensures the inter-temporal balance of commodity stocks. The parameter \(commodity\_stocks_{n,c,l}\) can be used to model exogenous additions to the stock
\[\begin{split}STOCK_{n,c,l,y} + commodity\_stock_{n,c,l,y} = duration\_period_{y} \cdot & \sum_{h} STOCK\_CHG_{n,c,l,y,h} \\ & + STOCK_{n,c,l,y+1}\end{split}\]
Technology section¶
Technical and engineering constraints¶
The first set of constraints concern technologies that have explicit investment decisions and where installed/maintained capacity is relevant for operational decisions. The set where \(T^{INV} \subseteq T\) is the set of all these technologies.
Equation CAPACITY_CONSTRAINT¶
This constraint ensures that the actual activity of a technology at a node cannot exceed available (maintained) capacity summed over all vintages, including the technology capacity factor \(capacity\_factor_{n,t,y,t}\).
\[\sum_{m} ACT_{n,t,y^V,y,m,h} \leq duration\_time_{h} \cdot capacity\_factor_{n,t,y^V,y,h} \cdot CAP_{n,t,y^V,y} \quad \forall \ t \ \in \ T^{INV}\]
Equation CAPACITY_MAINTENANCE_HIST¶
The following three constraints implement technology capacity maintenance over time to allow early retirment. The optimization problem determines the optimal timing of retirement, when fixed operation-and-maintenance costs exceed the benefit in the objective function.
The first constraint ensures that historical capacity (built prior to the model horizon) is available as installed capacity in the first model period.
\[\begin{split}CAP_{n,t,y^V,'first\_period'} & \leq remaining\_capacity_{n,t,y^V,'first\_period'} \cdot duration\_period_{y^V} \cdot historical\_new\_capacity_{n,t,y^V} \\ & \text{if } y^V < 'first\_period' \text{ and } |y| - |y^V| < technical\_lifetime_{n,t,y^V} \quad \forall \ t \in T^{INV}\end{split}\]
Equation CAPACITY_MAINTENANCE_NEW¶
The second constraint ensures that capacity is fully maintained throughout the model period in which it was constructed (no early retirement in the period of construction).
\[CAP_{n,t,y^V,y^V} = remaining\_capacity_{n,t,y^V,y^V} \cdot duration\_period_{y^V} \cdot CAP\_NEW{n,t,y^V} \quad \forall \ t \in T^{INV}\]
The current formulation does not account for construction time in the constraints, but only adds a mark-up to the investment costs in the objective function.
Equation CAPACITY_MAINTENANCE¶
The third constraint implements the dynamics of capacity maintenance throughout the model horizon. Installed capacity can be maintained over time until decommissioning, which is irreversible.
\[\begin{split}CAP_{n,t,y^V,y} & \leq remaining\_capacity_{n,t,y^V,y} \cdot CAP_{n,t,y^V,y-1} \\ \quad & \text{if } y > y^V \text{ and } y^V > 'first\_period' \text{ and } |y| - |y^V| < technical\_lifetime_{n,t,y^V} \quad \forall \ t \in T^{INV}\end{split}\]
Equation OPERATION_CONSTRAINT¶
This constraint provides an upper bound on the total operation of installed capacity over a year. It can be used to represent reuqired scheduled unavailability of installed capacity.
\[\sum_{m,h} ACT_{n,t,y^V,y,m,h} \leq operation\_factor_{n,t,y^V,y} \cdot capacity\_factor_{n,t,y^V,y,m,\text{'year'}} \cdot CAP_{n,t,y^V,y} \quad \forall \ t \in T^{INV}\]
This constraint is only active if \(operation\_factor_{n,t,y^V,y} < 1\).
Equation MIN_UTILIZATION_CONSTRAINT¶
This constraint provides a lower bound on the total utilization of installed capacity over a year.
\[\sum_{m,h} ACT_{n,t,y^V,y,m,h} \geq min\_utilization\_factor_{n,t,y^V,y} \cdot CAP_{n,t,y^V,y} \quad \forall \ t \in T^{INV}\]
This constraint is only active if \(min\_utilization\_factor_{n,t,y^V,y}\) is defined.
Constraints representing renewable integration¶
Equation RENEWABLES_EQUIVALENCE¶
This constraint defines the auxiliary variables \(REN\) to be equal to the output of renewable technologies (summed over grades).
\[\begin{split}\sum_{g} REN_{n,t,c,g,y,h} \leq \sum_{\substack{n,t,m,l,h,h^{OD} \\ y^V \leq y \\ \ l \in L^{REN} \subseteq L }} input_{n^L,t,y^V,y,m,n,c,l,h,h^{OD}} \cdot ACT_{n^L,t,m,y,h}\end{split}\]
The set \(L^{REN} \subseteq L\) denotes all levels for which the detailed representation of renewables applies.
Equation RENEWABLES_POTENTIAL_CONSTRAINT¶
This constraint sets the potential potential by grade as the upper bound for the auxiliary variable \(REN\).
\[\begin{split}\sum_{\substack{t,h \\ \ t \in T^{R} \subseteq t }} REN_{n,t,c,g,y,h} \leq \sum_{\substack{l \\ l \in L^{R} \subseteq L }} renewable\_potential_{n,c,g,l,y}\end{split}\]
Equation RENEWABLES_CAPACITY_REQUIREMENT¶
This constraint connects the capacity factor of a renewable grade to the installed capacity of a technology. It sets the lower limit for the capacity of a renewable technology to the summed activity over all grades (REN) devided by the capactiy factor of this grade. It represents the fact that different renewable grades require different installed capacities to provide their full potential.
\[\begin{split}\sum_{y^V, h} & CAP_{n,t,y^V,y} \cdot operation\_factor_{n,t,y^V,y} \cdot capacity\_factor_{n,t,y^V,y,h} \\ & \quad \geq \sum_{g,h,l} \frac{1}{renewable\_capacity\_factor_{n,c,g,l,y}} \cdot REN_{n,t,c,g,y,h}\end{split}\]
This constraint is only active if \(renewable\_capacity\_factor_{n,c,g,l,y}\) is defined.
Constraints for addon technologies¶
Equation ADDON_ACTIVITY_UP¶
This constraint provides an upper bound on the activity of an addon technology that can only be operated jointly with a parent technology (e.g., abatement option, SO2 scrubber, power plant cooling technology).
\[\sum_{\substack{t' \sim t^A, y^V \leq y}} ACT_{n,t',y^V,y,m,h} \leq \sum_{\substack{t, y^V \leq y}} addon\_up_{n,t^a,y,m,h,t^A} \cdot addon\_conversion_{n,t',y^V,y,m,h} \cdot ACT_{n,t,y^V,y,m,h}\]
Equation ADDON_ACTIVITY_LO¶
This constraint provides a lower bound on the activity of an addon technology that has to be operated jointly with a parent technology (e.g., power plant cooling technology). The parameter addon_lo allows to define a minimum level of operation of addon technologies relative to the activity of the parent technology. If addon_minimum = 1, this means that it is mandatory to operate the addon technology at the same level as the parent technology (i.e., full mitigation).
\[\sum_{\substack{t' \sim t^A, y^V \leq y}} ACT_{n,t',y^V,y,m,h} \geq \sum_{\substack{t, y^V \leq y}} addon\_lo_{n,t^a,y,m,h,t^A} \cdot addon\_conversion_{n,t',y^V,y,m,h} \cdot ACT_{n,t,y^V,y,m,h}\]
System reliability and flexibility requirements¶
This section followi allows to include system-wide reliability and flexility considerations. The current formulation is based on Sullivan et al., 2013 [sullivan_VRE_2013].
Aggregate use of a commodity¶
The system reliability and flexibility constraints are implemented using an auxiliary variable representing the total use (i.e., input of each commodity per level).
Equation COMMODITY_USE_LEVEL¶
This constraint defines the auxiliary variable \(COMMODITY\_USE_{n,c,l,y}\), which is used to define the rating bins and the peak-load that needs to be offset with firm (dispatchable) capacity.
\[\begin{split}COMMODITY\_USE_{n,c,l,y} = & \sum_{n^L,t,y^V,m,h} input_{n^L,t,y^V,y,m,n,c,l,h,h} \\ & \quad \cdot duration\_time\_rel_{h,h} \cdot ACT_{n^L,t,y^V,y,m,h}\end{split}\]
This constraint and the auxiliary variable is only active if \(peak\_load\_factor_{n,c,l,y,h}\) or \(flexibility\_factor_{n,t,y^V,y,m,c,l,h,r}\) is defined.
Auxilary variables for technology activity by “rating bins”¶
The capacity and activity of certain (usually non-dispatchable) technologies can be assumed to only partially contribute to the system reliability and flexibility requirements.
Equation ACTIVITY_RATING_BIN¶
The auxiliary variable for rating-specific activity of each technology cannot exceed the share of the rating bin in relation to the total commodity use.
Reliability of installed capacity¶
The “firm capacity” that a technology can contribute to system reliability depends on its dispatch characteristics. For dispatchable technologies, the total installed capacity counts toward the firm capacity constraint. This is active if the parameter is defined over \(reliability\_factor_{n,t,y,c,l,h,'firm'}\). For non-dispatchable technologies, or those that do not have explicit investment decisions, the contribution to system reliability is calculated by using the auxiliary variable \(ACT\_RATING_{n,t,y^V,y,c,l,h,q}\) as a proxy, with the \(reliability\_factor_{n,t,y,c,l,h,q}\) defined per rating bin \(q\).
Equation FIRM_CAPACITY_PROVISION¶
Technologies where the reliability factor is defined with the rating firm have an auxiliary variable \(CAP\_FIRM_{n,t,c,l,y,q}\), defined in terms of output.
\[\begin{split}\sum_q CAP\_FIRM_{n,t,c,l,y,q} = \sum_{y^V \leq y} & output_{n^L,t,y^V,y,m,n,c,l,h^A,h} \cdot duration\_time_h \\ & \quad \cdot capacity\_factor_{n,t,y^V,y,h} \cdot CAP_{n,t,y^Y,y} \quad \forall \ t \in T^{INV}\end{split}\]
Equation SYSTEM_RELIABILITY_CONSTRAINT¶
This constraint ensures that there is sufficient firm (dispatchable) capacity in each period. The formulation is based on Sullivan et al., 2013 [sullivan_VRE_2013].
\[\begin{split}\sum_{t, q \substack{t \in T^{INV} \\ y^V \leq y} } & reliability\_factor_{n,t,y,c,l,h,'firm'} \cdot CAP\_FIRM_{n,t,c,l,y} \\ + \sum_{t,q,y^V \leq y} & reliability\_factor_{n,t,y,c,l,h,q} \cdot ACT\_RATING_{n,t,y^V,y,c,l,h,q} \\ & \quad \geq peak\_load\_factor_{n,c,l,y,h} \cdot COMMODITY\_USE_{n,c,l,y}\end{split}\]
This constraint is only active if \(peak\_load\_factor_{n,c,l,y,h}\) is defined.
Equation SYSTEM_FLEXIBILITY_CONSTRAINT¶
This constraint ensures that, in each sub-annual time slice, there is a sufficient contribution from flexible technologies to ensure smooth system operation.
\[\begin{split}\sum_{\substack{n^L,t,m,h^A \\ y^V \leq y}} & flexibility\_factor_{n^L,t,y^V,y,m,c,l,h,'unrated'} \\ & \quad \cdot ( output_{n^L,t,y^V,y,m,n,c,l,h^A,h} + input_{n^L,t,y^V,y,m,n,c,l,h^A,h} ) \\ & \quad \cdot duration\_time\_rel_{h,h^A} \cdot ACT_{n,t,y^V,y,m,h} \\ + \sum_{\substack{n^L,t,m,h^A \\ y^V \leq y}} & flexibility\_factor_{n^L,t,y^V,y,m,c,l,h,1} \\ & \quad \cdot ( output_{n^L,t,y^V,y,m,n,c,l,h^A,h} + input_{n^L,t,y^V,y,m,n,c,l,h^A,h} ) \\ & \quad \cdot duration\_time\_rel_{h,h^A} \cdot ACT\_RATING_{n,t,y^V,y,c,l,h,q} \geq 0\end{split}\]
Bounds on capacity and activity¶
Equation NEW_CAPACITY_BOUND_UP¶
This constraint provides upper bounds on new capacity installation.
\[CAP\_NEW_{n,t,y} \leq bound\_new\_capacity\_up_{n,t,y} \quad \forall \ t \ \in \ T^{INV}\]
Equation NEW_CAPACITY_BOUND_LO¶
This constraint provides lower bounds on new capacity installation.
\[CAP\_NEW_{n,t,y} \geq bound\_new\_capacity\_lo_{n,t,y} \quad \forall \ t \ \in \ T^{INV}\]
Equation TOTAL_CAPACITY_BOUND_UP¶
This constraint gives upper bounds on the total installed capacity of a technology in a specific year of operation summed over all vintages.
\[\sum_{y^V \leq y} CAP_{n,t,y,y^V} \leq bound\_total\_capacity\_up_{n,t,y} \quad \forall \ t \ \in \ T^{INV}\]
Equation TOTAL_CAPACITY_BOUND_LO¶
This constraint gives lower bounds on the total installed capacity of a technology.
\[\sum_{y^V \leq y} CAP_{n,t,y,y^V} \geq bound\_total\_capacity\_lo_{n,t,y} \quad \forall \ t \ \in \ T^{INV}\]
Equation ACTIVITY_BOUND_UP¶
This constraint provides upper bounds by mode of a technology activity, summed over all vintages.
\[\sum_{y^V \leq y} ACT_{n,t,y^V,y,m,h} \leq bound\_activity\_up_{n,t,m,y,h}\]
Equation ACTIVITY_BOUND_ALL_MODES_UP¶
This constraint provides upper bounds of a technology activity across all modes and vintages.
\[\sum_{y^V \leq y, m} ACT_{n,t,y^V,y,m,h} \leq bound\_activity\_up_{n,t,y,'all',h}\]
Equation ACTIVITY_BOUND_LO¶
This constraint provides lower bounds by mode of a technology activity, summed over all vintages.
\[\sum_{y^V \leq y} ACT_{n,t,y^V,y,m,h} \geq bound\_activity\_lo_{n,t,y,m,h}\]
We assume that \(bound\_activity\_lo_{n,t,y,m,h} = 0\) unless explicitly stated otherwise.
Equation ACTIVITY_BOUND_ALL_MODES_LO¶
This constraint provides lower bounds of a technology activity across all modes and vintages.
\[\sum_{y^V \leq y, m} ACT_{n,t,y^V,y,m,h} \geq bound\_activity\_lo_{n,t,y,'all',h}\]
We assume that \(bound\_activity\_lo_{n,t,y,'all',h} = 0\) unless explicitly stated otherwise.
Emission section¶
Auxiliary variable for aggregate emissions¶
Equation EMISSION_EQUIVALENCE¶
This constraint simplifies the notation of emissions aggregated over different technology types and the land-use model emulator. The formulation includes emissions from all sub-nodes \(n^L\) of \(n\).
\[\begin{split}EMISS_{n,e,\widehat{t},y} = \sum_{n^L \in N(n)} \Bigg( \sum_{t \in T(\widehat{t}),y^V \leq y,m,h } emission\_factor_{n^L,t,y^V,y,m,e} \cdot ACT_{n^L,t,y^V,y,m,h} \\ + \sum_{s} \ land\_emission_{n^L,s,y,e} \cdot LAND_{n^L,s,y} \text{ if } \widehat{t} \in \widehat{T}^{LAND} \Bigg)\end{split}\]
Bound on emissions¶
Equation EMISSION_CONSTRAINT¶
This constraint enforces upper bounds on emissions (by emission type). For all bounds that include multiple periods, the parameter \(bound\_emission_{n,\widehat{e},\widehat{t},\widehat{y}}\) is scaled to represent average annual emissions over all years included in the year-set \(\widehat{y}\).
The formulation includes historical emissions and allows to model constraints ranging over both the model horizon and historical periods.
\[\begin{split}\frac{ \sum_{y' \in Y(\widehat{y}), e \in E(\widehat{e})} \begin{array}{l} duration\_period_{y'} \cdot emission\_scaling_{\widehat{e},e} \cdot \\ \Big( EMISS_{n,e,\widehat{t},y'} + \sum_{m} historical\_emission_{n,e,\widehat{t},y'} \Big) \end{array} } { \sum_{y' \in Y(\widehat{y})} duration\_period_{y'} } \leq bound\_emission_{n,\widehat{e},\widehat{t},\widehat{y}}\end{split}\]
Land-use model emulator section¶
Bounds on total land use¶
Equation LAND_CONSTRAINT¶
This constraint enforces a meaningful result of the land-use model emulator, in particular a bound on the total land used in MESSAGEix. The linear combination of land scenarios must be equal to 1.
\[\sum_{s \in S} LAND_{n,s,y} = 1\]
Dynamic constraints on land use¶
These constraints enforces upper and lower bounds on the change rate per land scenario.
Equation DYNAMIC_LAND_SCEN_CONSTRAINT_UP¶
\[\begin{split}LAND_{n,s,y} \leq & initial\_land\_scen\_up_{n,s,y} \cdot \frac{ \Big( 1 + growth\_land\_scen\_up_{n,s,y} \Big)^{|y|} - 1 } { growth\_land\_scen\_up_{n,s,y} } \\ & + \big( LAND_{n,s,y-1} + historical\_land_{n,s,y-1} \big) \cdot \Big( 1 + growth\_land\_scen\_up_{n,s,y} \Big)^{|y|}\end{split}\]
Equation DYNAMIC_LAND_SCEN_CONSTRAINT_LO¶
\[\begin{split}LAND_{n,s,y} \geq & - initial\_land\_scen\_lo_{n,s,y} \cdot \frac{ \Big( 1 + growth\_land\_scen\_lo_{n,s,y} \Big)^{|y|} - 1 } { growth\_land\_scen\_lo_{n,s,y} } \\ & + \big( LAND_{n,s,y-1} + historical\_land_{n,s,y-1} \big) \cdot \Big( 1 + growth\_land\_scen\_lo_{n,s,y} \Big)^{|y|}\end{split}\]
These constraints enforces upper and lower bounds on the change rate per land type determined as a linear combination of land use scenarios.
Equation DYNAMIC_LAND_TYPE_CONSTRAINT_UP¶
\[\begin{split}\sum_{s \in S} land\_use_{n,s,y,u} &\cdot LAND_{n,s,y} \leq initial\_land\_up_{n,y,u} \cdot \frac{ \Big( 1 + growth\_land\_up_{n,y,u} \Big)^{|y|} - 1 } { growth\_land\_up_{n,y,u} } \\ & + \Big( \sum_{s \in S} \big( land\_use_{n,s,y-1,u} + dynamic\_land\_up_{n,s,y-1,u} \big) \\ & \quad \quad \cdot \big( LAND_{n,s,y-1} + historical\_land_{n,s,y-1} \big) \Big) \\ & \quad \cdot \Big( 1 + growth\_land\_up_{n,y,u} \Big)^{|y|}\end{split}\]
Equation DYNAMIC_LAND_TYPE_CONSTRAINT_LO¶
\[\begin{split}\sum_{s \in S} land\_use_{n,s,y,u} &\cdot LAND_{n,s,y} \geq - initial\_land\_lo_{n,y,u} \cdot \frac{ \Big( 1 + growth\_land\_lo_{n,y,u} \Big)^{|y|} - 1 } { growth\_land\_lo_{n,y,u} } \\ & + \Big( \sum_{s \in S} \big( land\_use_{n,s,y-1,u} + dynamic\_land\_lo_{n,s,y-1,u} \big) \\ & \quad \quad \cdot \big( LAND_{n,s,y-1} + historical\_land_{n,s,y-1} \big) \Big) \\ & \quad \cdot \Big( 1 + growth\_land\_lo_{n,y,u} \Big)^{|y|}\end{split}\]
Section of generic relations (linear constraints)¶
This feature is intended for development and testing only - all new features should be implemented as specific new mathematical formulations and associated sets & parameters!
Auxiliary variable for left-hand side¶
Equation RELATION_EQUIVALENCE¶
\[\begin{split}REL_{r,n,y} = \sum_{t} \Bigg( & \ relation\_new\_capacity_{r,n,y,t} \cdot CAP\_NEW_{n,t,y} \\[4 pt] & + relation\_total\_capacity_{r,n,y,t} \cdot \sum_{y^V \leq y} \ CAP_{n,t,y^V,y} \\ & + \sum_{n^L,y',m,h} \ relation\_activity_{r,n,y,n^L,t,y',m} \\ & \quad \quad \cdot \Big( \sum_{y^V \leq y'} ACT_{n^L,t,y^V,y',m,h} + historical\_activity_{n^L,t,y',m,h} \Big) \Bigg)\end{split}\]
The parameter \(historical\_new\_capacity_{r,n,y}\) is not included here, because relations can only be active in periods included in the model horizon and there is no “writing” of capacity relation factors across periods.